With the KNX secure SMI actuators, up to 16 SMI or SMI LoVo sun shading drives can be controlled independently of each other in a maximum of 16 groups. KNX actuators in the secure series conform to the "KNX Secure standard". This means that access is only possible for authorised participants.

Adjustable

Flexible use: WAREMA KNX secure actuators SMI individually control 230 V AC SMI or 24 V DC SMI LoVo sun shading drives via 16 outputs. Useful parameters are already pre-configured, making setup easier.

Wide range of control functions

Intelligent controls: the actuator offers a wide range of control modes for sun shading, including integrated sun position calculation, heating support and presence and safety functions.

Simple commissioning

Ready for operation quickly: standardised WAREMA parameters and intelligent detection procedures precisely configure the awnings. The system automatically detects replaced motors. The KNX secure SMI DCA app and the KNX actuators app quickly and easily execute commissioning.
  • Individual control and parameterisation of 16 SMI drives in up to 16 groups
  • Extensive status objects
  • Extensive control functions e.g. integrated sun position calculation, slat tracking, heating support, presence and safety functions
  • Priorities of individual functions freely configurable
  • Limitation of manual operation (e.g. Cut-Off limitation)
  • Freely applicable logic and timer functions
  • Limit values and measuring values can be adjusted using the ETS parameters and the group object
  • Simple linking of WAREMA KNX devices thanks to additional 3 byte object
  • Preset output type for different sun shading products with preset basic parameters
  • Highest precision in positioning thanks to extensive adjustment options for motor properties
  • Support for commissioning via ETS DCA app and KNX actuators smartphone app (Bluetooth)
  • SMI drives can be switched off via integrated relay, avoiding permanent standby current consumption
 Article number: 2094100
  • SMI certified according to standard 3.0
  • Emergency/manual operation via push buttons
  • Firmware update via KNX

Description

Value

Operating voltage

230 V AC

Connection type

Plug terminal

Switching capacity per drive

3600 VA (unfused, 16 drives)

SMI interface

Up to 16 x 230 V AC SMI drives

Degree of protection

IP 30

Safety class

I

Radio interface

Bluetooth LE

Type of installation

DIN rail-mounted (REG)

Subassembly width

3 MW

Hardware to connect up to 12 drives with 2 separate supplies