The 230 V AC KNX secure actuators can be used to independently control up to eight sun shading drives with 230 V AC. KNX actuators in the secure series conform to the "KNX Secure standard". This means that access is only possible for authorised participants.

Adjustable

Flexible application: WAREMA KNX secure actuators 230 V AC actuators individually control 230 V AC sun shading drives via 2, 4, 6 or 8 outputs. Useful parameters are already pre-configured, making setup easier.

Wide range of control functions

The actuator offers a wide range of control modes for sun shading, including integrated sun position calculation, heating support and presence and safety functions.

Straightforward

Easy commissioning of KNX secure actuators thanks to unique manual operation via Bluetooth LE. The KNX secure pro version is equipped with automatic run time detection and a smart update function.
  • Individual control and parameterisation of 8 output channels
  • Extensive status objects
  • Extensive control functions e.g. integrated sun position calculation, slat tracking, heating support, presence and safety functions
  • Priorities of individual functions freely configurable
  • Limitation of manual operation (e.g. Cut-Off limitation)
  • Freely applicable logic and timer functions
  • Limit values and measuring values can be adjusted using the ETS parameters and the group object
  • Simple linking of WAREMA KNX devices thanks to additional 3 byte object
  • Preset output type for different sun shading products with preset basic parameters
  • Special settings for ZIP awnings with responsive obstacle detection
  • Highest precision in positioning thanks to extensive adjustment options for motor properties
  • Support for commissioning via the KNX actuator smartphone app (Bluetooth)
  • Fast commissioning and higher functional reliability thanks to automatic run time detection
  • Integrated run time adjustment compensates for ageing-related run time differences
  • Motor current and run time monitoring with error output via fault message object (standard motors)
 Article number: 2100891
  • Interchangeable miniature fuse for line guard
  • Reverse rotation direction programmable via ETS
  • Up to 16 integrated binary inputs (e.g. switching, dimming, venetian blinds, scenario buttons, free status/edge evaluation)
  • Firmware update via KNX

Description

Value

Operating voltage

230 V AC

Connection type

Plug terminal

Output

8 x 230 V AC

Switching capacity per drive

500 VA with 230 V AC cos φ = 0.6

Input digital

16 x binary inputs

Degree of protection

IP 30

Safety class

I

Radio interface

Bluetooth LE

Type of installation

DIN rail-mounted (REG)

Subassembly width

12 MW