Combines two systems
Control WMS sun shading products directly in the KNX system: the KNX converter WMS seamlessly connects the sun shading products controlled by WMS with the KNX system.
Minimal installation work
Practical integration into an existing KNX system: thanks to the quick and easy installation, this is the perfect solution when retrofitting.
Comfortable
Operation and automation with WMS transmitters and sensors remains possible.
-
Integration of up to 25 WMS receivers in one KNX system
-
Commands are transmitted to the KNX converter WMS via KNX and forwarded to the WMS receivers by radio
- Retrofitting possible with minimal installation effort
- Commissioning is carried out using WMS studio pro and the KNX software ETS
- Parameterisable product types:
- Venetian blind/external venetian blind
- Awning optionally available with controllable valance
- Roller shutter/textile sun shading system
- Slat roof
- Light (switching/dimming)
- Radiant heater (switching/dimming)
- Status objects:
- Blind length (also for valances) and slat position
- Switching and brightness or power value
- KNX control:
- Up/down and stop/step move command (also for valances)
- Approach blind length (also for valances)
- Switch on/off
- Dimming (relative)
- Brightness and power value
- Safety object (predefined via WMS)
- 8 x scenario recall per channel
- Operation and automation of WMS receivers is possible with WMS transmitters and with the WMS sensors
Description
Value
Operating voltage
KNX bus voltage
Output
Bidirectional radio signal
Transmission frequency
2,4 GHz
Degree of protection
IP 20
Safety class
III
Type of installation
Flush-mounted (UP)
Width
48 mm
Height
48 mm
Depth
30 mm
Power supply unit incl. connecting line for commissioning the KNX converter WMS
Device connecting line for KNX converter WMS