The WAREMA climatronic® control panel 3.0 processes incoming data from the connected sensors, coordinates these with the individual settings and automatically forwards commands to the actuators via the climabus.

Communicative

The easy-to-understand menu design makes it especially simple to operate the sun shading system and lighting.

Comfort that lasts

The control panel processes incoming data from the connected sensors and automatically controls the sun shading, light, and climate – depending on the ambient conditions.

Perfected

Optimum light output without direct glare: the control system tracks the position and angle of the sun and moves the slats accordingly. It takes into account sunlight shining in from the side when doing so.
  • Can be expanded with WAREMA climatronic® WebControl, for operation by smartphone
  • Power consumers can be distributed across up to 64 channels
  • Control of up to 1200 actuators (max. 7200 power consumers)
  • Channels can be operated individually or in groups
  • Up to 16 scenes can be set
  • Control of the following aspects of power consumers:
    • Brightness (including slat tracking based on the sun's position)
    • Dawn/dusk
    • Wind speeds
    • Precipitation
    • Ice
    • Time
    • Temperature outside
    • Inside temperature
    • Inside humidity
  • History of important events and weather data
  • Available languages: German, English, French, Italian, Spanish, Norwegian, Swedish, Japanese, Chinese
  • Graphic 5.7" display
  • Operated via sensor push buttons and function wheel
  • Integrated temperature and humidity sensor
  • USB connection for operation and programming on PC with WAREMA climatronic® studio
  • Integrated commissioning assistant for commissioning with control panel
  • SD card slot for saving and loading settings
  • Radio operation possible via EWFS transmitter
  • Using the control panel as a WAREMA climatronic® KNX central weather unit via KNX Gateway (KNX gateway on request)
 Article number: 2009375

Description

Value

Operating voltage

24 V DC

Transmission frequency

433,92 MHz

Degree of protection

IP 30

Safety class

III

Type of installation

Surface-mounted (AP)

Inside temperature

0 - 50 °C

Humidity

10 - 85 %

Width

245 mm

Height

160 mm

Depth

30 mm

Mounting set for the installation of a WAREMA climatronic® UP power supply unit and switch actuator, for example

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads

Hardware for integrating a mobile end device into the WAREMA climatronic® system as a control panel. Operation via app or web browser

Hardware for transmitting measuring values from a weather station in several Wisotronic networks

1 or 8-channel hand-held transmitter for wireless operation of EWFS receivers