Our support will assist you with the commissioning of your WAREMA KNX devices. On this page, you will find helpful instructions, practical examples, and answers to frequently asked questions.
Our video tutorials provide a brief overview and a step by step explanation of how to program and commission WAREMA KNX devices.
- The slats of external venetian blinds are automatically adjusted to the current position of the sun.
- The cut-off function supports a slat position that reduces direct sunlight while allowing diffuse daylight to be used for room illumination.
- Slat tracking is a room automation function described in VDI 3813 Part 2.
- Calculation of the shading pattern for defined window areas over the course of the day and year
- Consideration of shadows cast by the surroundings, for example by courtyards or neighbouring buildings
- Window-specific control of the sun shading system based on the calculated shading situation
- Can reduce movements when window areas are already shaded
- Results from wind studies can be taken into account when planning and configuring the sun shading control system.
- Based on the wind study, suitable measuring points on the building can be determined on a project-specific basis.
- Wind direction and wind speed can be taken into account individually for sun shading products.
- Enables demand-based, wind-dependent use of the sun shading system.
- Supports wind-related planning and control of the sun shading system.
Our experts are happy to assist you with any questions regarding KNX, whether you need advice or support for commissioning or order processing.