Discover comprehensive support for your WAREMA Omnexo solutions. On this page you will find helpful instructions, practical downloads and answers to frequently asked questions.

The following instruction videos give a brief overview and step-by-step explanations of how you program Omnexo and begin using it.

 

Downloads

Omnexo studio
Software for commissioning, changing parameters and operation via PC.

Omnexo studio(Windows)
Omnexo studio (macOS)

  • Integrate the Omnexo Central control unit into your own network via the LAN connection or connect it directly with a laptop. Alternatively, create a direct connection via the integrated WLAN hotspot.
  • The device with the Omnexo app or Omnexo studio must be on the same network as the central control unit or directly connected to the integrated hotspot via the WLAN.
  • Use the "Connection" icon in Omnexo studio to enter the IP address of the Omnexo Central control unit and connect it by clicking on the button.

  • The device with the Omnexo app or Omnexo studio must be on the same network as the central control unit. Alternatively, you can use the integrated hotspot of the Omnexo Central control unit to create a connection.
  • Open Omnexo studio and click on the "Settings" icon to open the selection menu.
  • Under Project, choose "Import project from central unit" to import the programming from the Omnexo Central control unit.
  • You can now modify the settings and the parameters.
  • Important: After changing the parameters, you must import the project into the central control unit again.

  • Log in to your WAREMA plus account.
  • An end device with the Omnexo app or Omnexo studio.
  • The Omnexo Central control unit must have an active internet connection.
  • Cloud access is activated in the Omnexo Central control unit menu (see the "Central Unit" tab in Omnexo studio).
    Note: Cloud operation is currently only possible via the "admin" account.

  • The device with the Omnexo app or Omnexo studio must be on the same network as the central control unit. Alternatively, set up a connection via the browser interface.
  • Log into the software as "admin".
  • Open the "Settings area" and import the project from the central control unit.
  • On the "User Management" tab, open the relevant user's list using the pencil icon.
  • Open the Edit menu next to the user name using the pencil icon. You do not need the old password.
  • Enter the new password and accept it.
  • Important: After the change has been made, the project must be reimported into the central control unit.

  • The device with the Omnexo app or Omnexo studio must be on the same network as the central control unit.
  • Connect Omnexo studio to the central control unit and click on the "Settings" icon to open the selection menu.
  • The current software version is shown on the "Central Unit" tab.
  • Start the software update by clicking on the "Update Software" button.

  • You can find the cause in the history on the "Operation" menu.

Our experts will be happy to help you with any questions you may have about Omnexo, whether you want advice or support with commissioning or order processing.