The WAREMA Modbus actuator 24 V can be used to control 4 sun shading drives with 24 V DC independently of each other. They integrate into an existing network with Modbus protocol and implement commands from a higher-level control.

Integrative

WAREMA Modbus actuators 24 V execute move commands of your superordinate control and control 24 V DC sun shading drives with pole changer switching across four outputs.

Open

The open Modbus protocol links your devices from different manufacturers. With WAREMA Modbus actuators 24 V, sun shading products can be integrated into your existing system so you can centrally control the functions of various devices.

Simple

Connection is straightforward. The actuator has inputs for standard push buttons. The operating mode is automatically adapted to your connected sun shading products.

  • Actuation of up to four 24 V sun shading drives with pole changer switching
  • Connection of drives possible with incremental encoder
  • Required connecting lines:
    • 24 V connecting line for supplying the actuator and the connected drives
    • 4-wire bus cable (Modbus)
  • Connection of conventional push buttons to local individual and group operation
  • Locking contacts to disable the drive (e.g. when windows are open)
Article number: 2030960

Description

Value

Operating voltage

24 V DC

Output

4 x 24 V DC

Switching capacity per drive

72 W

Degree of protection

IP 30

Safety class

III

Type of installation

Surface-mounted (AP)

Width

158 mm

Height

180 mm

Depth

60 mm

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads