EWFS Haustechnik PL/FZL UP is a flush-mounted receiver for directly controlling 230 V sun shading drives via an EWFS transmitter (operating voltage 230 V).

Unobtrusive

The receiver is unobtrusively built into a flush-mounted box.

Networked

You can control your drive with a central control system and with your EWFS transmitter.

Direct

The system receives commands from all EWFS transmitters and sensors and directly controls your sun shading drive. Suitable for drives with 230 V operating voltage.

  • FZL: RTL, Radio time mode for controlling slat products
  • Power is supplied to the receiver by a 230 V connecting line
  • Control possible with a sun shading control system, e.g. Wisotronic via a central input (230 V)
  • Compact design enables installation in a flush-mounted box
  • Suitable for use in small construction projects (up to approx. 30 units)
Article number: 1002625

Description

Value

Operating voltage

230 V AC

Frequency

50 Hz

Control voltage

230 V AC

Output

230 V AC

Switching capacity per drive

max. 700 VA

Transmission frequency

433,92 MHz

Logic behaviour

FZL

Run time up/down

3 minutes

Degree of protection

IP 20

Safety class

II

Type of installation

Flush-mounted (UP)

Width

49 mm

Height

49 mm

Depth

30 mm

Junction box without terminals