Clean facade design for your glass front

One with the facade: the slats and end rails are guided by a tension cable and are almost invisible, and are secured laterally with tension cable brackets. With minimum distance, the cover panel fits flush against the facade and sets a mark for understated aesthetics.

Simple integration

Reliable, suitable and fast: only a few dimensions are needed for simple planning. Premounted components enable efficient installation.

Glare-free atmosphere

Use the slats to control how much sun you let in and to make the most of the daylight without being disturbed by the glare.

  • External sun shading systems with tilting aluminium slats in a modern design
  • Various technical models available
  • Flexible, individual daylight utilisation for a pleasant room atmosphere
Types of drive Motor
1 Cover panel
2 Mounting profile
3 Cover panel console
4 Slats
5 Tilting tape, lifting tape
6 Lateral guidance
7 End rail
3950 mm 4000 mm 15.8 m²

  • Ergonomic lighting design for increased well-being
  • Compliance with legal standards
  • Reduction in energy costs for artificial lighting

  • External venetian blind slats move in the open position
  • A possible dim-out of the room during the movement is prevented

  • Approx. 1/3 tilting speed
  • No effect on the speed of the movement
  • Model with standard motors

  • In the event of a power failure, the emergency retraction can either be triggered manually using an emergency push button or automatically via sensors.

  • Ideal for use in buildings with two emergency routes
  • Opening speed in case of emergency approx. 33 seconds (for blind height 2200 mm)

Emergency power supply kit for automatic raising of sun shading products in the event of a power failure

  • Incidence of daylight also when slats are closed
  • Line of sight to the outside remains
  • Also possible for only part of the slats