The Inside 1 AP motor control unit with integrated power supply unit transmits move commands from central control units and push buttons to sun shading products with 24 V drives. The locking input prevents damage to the sun shading product when the windows are open.

Directly accessible

The motor control unit transfers commands of the central control unit or of the local push button to 24 V sun shading drives.

Logically operable

Time mode and permanent mode: using the push button, the right logic behaviour for the product type can be selected.

Lockable

Protective function: locking input locks the sun shading product when the window is open.
  • Direct control of a 24 V sun shading drive or window drive via a sun shading control system and a local push button.
  • Multiple motor control units can be combined into a group and controlled jointly with one push button.
  • The operating mode of the Push button can be switched between time mode and permanent mode.
  • ZL: In time mode, the MSE enters lock mode after the push button is pressed for approx. 2 seconds. Operating the push button briefly generates a tilting impulse (on slat products).
  • PL: In permanent mode, the MSE enters lock mode immediately after the push button is pressed (for fabric products/roller shutters).
  • “Fan out” program (complete slat tilting after stop or 3 minutes run time) in order to ensure the correct position of the slats.
  • Locking input allows the sun shading drive to be locked, e.g. when a window is opened.
  • Direct supply of 24 V motor and optional accessories (max. 1x EWFS Uniswitch or EWFS Piccolo FZL) with power via integrated power supply unit.
 Article number: 2038514

Description

Value

Operating voltage

230 V AC

Control voltage

24 V DC

Output

24 V DC

Switching capacity per drive

1 A at 24 V DC

Logic behaviour

ZL PL

Degree of protection

IP 30

Safety class

I

Type of installation

Surface-mounted (AP)

Width

83 mm

Height

212 mm

Depth

60 mm