Ready-to-install system

Uncomplicated, cost-effective on-site assembly – the cover panels are premounted at the factory with a side closure, panel brackets, a mounting profile and top rail brackets for direct installation into the cover panel consoles of the transom and mullion facade.

Perfect facade design

Ideally adapted and integrated into the facade structure. The WAREMA transom and mullion system achieves minimal cover panel spacing of 25 mm. 

Space-saving

Harmonious solution for transom and mullion facades: slats and end rails are guided securely along a tension cable and fastened at the sides with tension cable brackets.

  • External sun shading systems with tilting aluminium slats in a modern design
  • Various technical models available
  • Flexible, individual daylight utilisation for a pleasant room atmosphere
Types of drive Motor
3950 mm 4000 mm 15.8 m²

  • Additional manual opening for motor-operated external venetian blinds
  • Ideal for the second emergency route
  • Alternative to the motor with connection for additional crank operation

  • Can be used in different ways with almost all slat geometries

  • Early warning system unobtrusively attached to the end rail
  • Sensor system tuned to WAREMA external venetian blinds
  • Self-sufficient with integrated power supply

  • Ergonomic lighting design for increased well-being
  • Compliance with legal standards
  • Reduction in energy costs for artificial lighting

  • External venetian blind slats move in the open position
  • A possible dim-out of the room during the movement is prevented

  • Approx. 1/3 tilting speed
  • No effect on the speed of the movement
  • Model with standard motors

  • In the event of a power failure, the emergency retraction can either be triggered manually using an emergency push button or automatically via sensors.

  • Ideal for use in buildings with two emergency routes
  • Opening speed in case of emergency approx. 33 seconds (for blind height 2200 mm)

Emergency power supply kit for automatic raising of sun shading products in the event of a power failure

  • Incidence of daylight also when slats are closed
  • Line of sight to the outside remains
  • Also possible for only part of the slats